We are SS 310 Flat Bar manufacturers, suppliers, exporters and stockist in Saudi Arabia, UAE, Oman, Kuwait, Bahrain, Abu Dhabi, Iran and India. 310s Flat Bar embrace elements like Chromium, Nickel & Molybdenum. 310s Flat Bar is cost effective. Rates are less as compared to 310s Stainless Steel Flat Bar One of the most highlighted Properties of 310s Flat Bar is its own finest corrosion resistance, it is an non -magnetic alloy, excellent toughness and hardness. It is able to resistHeavy Pressure.
We also Customized the 310s Stainless Steel Flat Bar size according to the requirement of our customers. We Not only provide 310s Stainless Steel Flat Bar in India but across the World.For our Customer Satisfaction we also conduct various tests like PMI, Chemical Composition Analysis, Mechanical Properties Tests etc to make sure the material we provide to our customers are best according to their requirement.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | |||
|---|---|---|---|---|---|---|---|---|---|---|
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 | |||
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 | |||
| *Equivalent Grades for grade 310s stainless steels are given in table 1.*Equivalent Grades for 310s grade stainless steel Flat Bar | ||||||||||
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| SS 310 | 0.015 max | 2.0 max | 0.15 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min | |
| SS 310S | 0.08 max | 2.0 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min | |
| *Typical compositional ranges for grade 310s stainless steels are given in table 2.*Composition ranges for 310s grade stainless steel Flat Bar | ||||||||||
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | |
|---|---|---|---|---|---|
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40% | |
| *Typical mechanical properties for grade 310s stainless steels are given in table 3.*Mechanical properties of 310s grade stainless steel Flat Bar | |||||
| Standards | ASTM A240 / ASME SA240 |
| Thickness | 0.02mm -3mm |
| Width | 4mm -40mm |
| Finish | No.1, 2b, 2d, 2h, 2r, No.4, Hairline, Scotch Brite, Satin Finish, No.8, Ba. |
| Form | Heat Treatment, Anneling, Pickling, Polish, Electroplating, Anodising, Rolling, Hot Rolled, Cold Rolled, Cutting, Bending, Forging, Minor Fabrication etc. |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| *Flat Bar Specifications to grade 310s stainless steels are given in table 4.*Sheets Specifications to 310s grade stainless steel | |
